Registro MyAdvantech

MyAdvantech é um portal personalizado para clientes Advantech. Se tornando um membro Advantech, você pode receber as últimas novidades de produtos, convites para webinars e ofertas eStore especiais.

Faça seu registro para ter acesso rápido às informações da sua conta 24 horas por dia, 7 dias por semana.

Módulos de Condicionamento de Sinal e Placas Terminais

A linha ADAM-3000 consistem nos condicionadores de sinais configuráveis baseados em isolamento de bom custo-benefício para o mercado de hoje, incluindo módulos de condicionamento de sinal, I/Os isolados digitais, Fiação I/O para Placas Terminais, e Fiação I/O Geral. Os módulos de condicionamento de sinais são facilmente instalados para proteger os seus instrumentos e sinais de processo contra os efeitos nocivos dos loops de terra, o ruído do motor e outras interferências elétricas.

Product Categories

  • Signal Conditioning Modules

    Advantech signal conditioner for data acquisition systems provides sensor and signal conditioning on a per-module basis for variant type of sensor or signal. Depending on your specific application needs, including acquisition speed, and sensor types

    • ADAM-3011

      The ADAM-3011 is field-configurable, isolation-base, thermocouple input signal conditioner. ADAM-3011 uses microprocessor-controlled high-resolution 16-bit dual-slope, integrating A/D converter to acquire thermocouple signal and cold junction compensation input.
    • ADAM-3013

      ADAM-3013 is a DIN-rail mounted, RTD input signal conditioning module with 1000 VDC 3-way isolation between input, output and power. The switch configurable input and output offers flexible, wide ranging capability for Platinum and Nichel RTDs. The input of the ADAM-3013 RTD input can be configured for any one of up to fourteen defined temperature ranges and two OEM-defined ranges. The output is linearized to the RTD temperature input and can be set for either 0~5 V, 0~10 V or 0~20 mA.
    • ADAM-3014

      The ADAM-3014 is one of the most cost-effective, field-configurable, isolation-based signal conditioners available for protecting processed signals from harm-ful effects of ground loop, motor noise, and other electrical interference. The ADAM-3014 features a new optical isolation technique to provide 1000 VDC isolation with low power consumption and extreme accuracy and stability within a wide range of operating environments.
    • ADAM-3016

      ADAM-3016 is a DIN rail-mounted strain gauge input signal conditioning module with 1000 V DC 3-way isolation between input, output and power. The switch con-figurable input and output offers flexible, wide ranging capability for strain gauge. ADAM-3016 is equipped with a power LED to monitor the line power and a DC-to-DC converter status and 3 VR (ZERO, SPAN, EXCI) to calibrate input/output range and excitation voltage.
    • ADAM-3112

      The ADAM-3112 is an isolated AC voltage input signal conditioner. It supports three different AV voltage input modes (120V, 250V and 400V) and transduces them into 0~5VDC output.
    • ADAM-3114

      The ADAM-3114 is an isolated AC current input signal conditioner. It transduces 0~5A current into 0~5VDC output for users to measure.
  • Isolated Digital I/O Terminals

    The series Isolated Digital I/O terminals boards offer isolated digital input channels as well as isolated digital output channels with isolation up to 2500 VDC which makes it ideal for industrial applications where high-voltage isolation is required. In addition, all output channels are provided high-voltage protection.

    • ADAM-3854

      The ADAM-3854 features four industrial SPDT (Form C) electromechanical power relays and a DIN-rail mount. Each of the relays is controlled by a +24 VDC digital signal and is equipped with an adjacent LED to display its status. Each output is equipped with a varistor that shunts the surge voltage of an inductive load or electromagnetic brake to protect the relay contact points. All the relay outputs and relay controls are accessible through wiring terminals, allowing the ADAM-3854 to be easily connected to any item of equipment or device such as programmable logic controllers (PLCs).
    • ADAM-3864

      The ADAM-3864 is a solid state digital I/O module carrier backplane that accommodates any combination of up to four high-performance, low-cost photocoupler-isolated solid state digital I/O modules. This backplane can accept either 24 VDC or 5 VDC I/O modules, depending on the type of power supply.
  • I/O Wiring Terminal Boards (ADAM-3900 & PCLD Series)

    The ADAM-3000 series modules are the most cost-efficient, field configurable isolation-based signal conditioners on the market today. These modules are easily installed to protect your instruments and process signals from the harmful effects of ground loops, motor noise, and other electrical interference.

    • PCLD-8810I

      The PCLD-8810I is designed to match multifunction cards with 68-pin SCSI-II connectors, such as the PCI-1710/1710L/1710HG/1710HGL/1711/1711L/1716/1716L/1741U/1742U cards. PCLD-8810E is designed to match multifunction cards with 68-pin SCSI-II connectors, such as the PCIE-1810/1816/1816H cards. This screw-terminal board also includes cold junction sensing circuitry that allows direct measurements from thermocouple transducers. Together with software compensation and linearization, every thermocouple type can be accommodated. Due to its special PCB layout, you can install the PCLD-8811 to construct your own signal-conditioning circuits. The PCLD-8811 is an 8-order low-pass filter that can be programmable by jumper.
    • PCLD-8810E

      The PCLD-8810I is designed to match multifunction cards with 68-pin SCSI-II connectors, such as the PCI-1710/1710L/1710HG/1710HGL/1711/1711L/1716/1716L/1741U/1742U cards. PCLD-8810E is designed to match multifunction cards with 68-pin SCSI-II connectors, such as the PCIE-1810/1816/1816H cards. This screw-terminal board also includes cold junction sensing circuitry that allows direct measurements from thermocouple transducers. Together with software compensation and linearization, every thermocouple type can be accommodated. Due to its special PCB layout, you can install the PCLD-8811 to construct your own signal-conditioning circuits. The PCLD-8811 is an 8-order low-pass filter that can be programmable by jumper.
    • ADAM-39100

      100-pin DIN-rail SCSI Wiring Board To Be Used With PCI-1240U, PCI-1245, PCI-1245E, PCI-1265, PCI-1285E
    • ADAM-3909

      The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
    • ADAM-3920

      The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
    • ADAM-3925

      The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
    • ADAM-3937

      The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
    • ADAM-3950

      The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
    • ADAM-3951

      The ADAM-3951 is a SCSI-II 50-pin wiring terminal module with LED indicators for DIN-rail mounting. This terminal module can be readily connected to the Advantech PC-Lab cards and allow easy yet reliable access to individual pin connections for the PCI-1752/1754/1756 card.
    • ADAM-3962

      The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
    • ADAM-3968

      The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
    • ADAM-3968/20

      The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
    • ADAM-3968/50

      The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
    • PCLD-7216

      The PCLD-7216 is an SSR I/O module carrier board that holds any combination of up to 16 SSR I/O modules. Each channel is equipped with two screw terminals for field connections. The PCLD- 7216 can be connected to the PCL-722, PCL-724 or PCL-731 via its Opto-22 compatible 50-pin edge connector.
    • PCLD-780

      PCLD-780 and PCLD-880 universal screw-terminal boards provide convenient and reliable signal wiring for PC-LabCard™ products with 20-pin flat-cable connectors. PCLD-880is also equipped with a DB37 connector to support PC-LabCard™ products with DB37 connectors.PCLD-780 and PCLD-880 let you install passive components on the special PCB layout to construct your own signal-conditioning circuits.You can easily construct a low-pass filter, attenuator or current-to-voltage converter by adding resistors and capacitors onto the board's circuit pads.
    • PCLD-782

      PCLD-782 and PCLD-782B digital input daughterboards feature high-voltage (> 1,500 VDC) optical isolation on all inputs. PCLD-782 provides 16 input channels accessible through one 20-pin flat cable connector, which is standard on most PC-LabCard™ products. The PCLD-782B provides either 16 or 24 channels, depending on what connector you use. The PCLD-782B’s 20-pin connector lets you access 16 channels, similar to the PCLD-782, but also provides a 50-pin Opto-22 connector with access to 24 channels.Both cards have onboard screw terminals for easy input wiring. Optically isolated signal conditioning provides isolation between separate channels, as well as between each input channel and the PC. This isolation prevents floating potential and ground loop problems while protecting the input lines from potentially damaging fault conditions.
    • PCLD-782B

      PCLD-782 and PCLD-782B digital input daughterboards feature high-voltage (> 1,500 VDC) optical isolation on all inputs. PCLD-782 provides 16 input channels accessible through one 20-pin flat cable connector, which is standard on most PC-LabCard™ products. The PCLD-782B provides either 16 or 24 channels, depending on what connector you use. The PCLD-782B’s 20-pin connector lets you access 16 channels, similar to the PCLD-782, but also provides a 50-pin Opto-22 connector with access to 24 channels. Both cards have onboard screw terminals for easy input wiring. Optically isolated signal conditioning provides isolation between separate channels, as well as between each input channel and the PC. This isolation prevents floating potential and ground loop problems while protecting the input lines from potentially damaging fault conditions.
    • PCLD-785

      The PCLD-785 carries 16/24 SPDT electromechanical relays with a 20-pin flat cable connector and an additional 50-pin Opto-22 connector (for PCLD-785B only) compatible with the digital outputs of most I/O Cards. The number of output channels available on the PCLD-785B depends on the connector you use. The I/O card’s 50-pin connector accesses all 24 channels, while its 20-pin connector has access to 16 channels.
    • PCLD-785B

      The PCLD-785B carry 16/24 SPDT electromechanical relays with a 20-pin flat cable connector and an additional 50-pin Opto-22 connector (for PCLD-785B only) compatible with the digital outputs of most I/O Cards. The number of output channels available on the PCLD-785B depends on the connector you use. The I/O card’s 50-pin connector accesses all 24 channels, while its 20-pin connector has access to 16 channels. The PCLD-785B automatically selects the correct control logic for the connector in use.
    • PCLD-786

      The PCLD-786 is an SSR I/O module carrier board that can accept up to eight photo-coupler isolated solid state relay modules and drive up to eight external relays. It is designed as an accessory board for any PC-LabCard equipped with 16 digital outputs on a standard 20-pin connector. The PCLD-786 accepts up to eight Opto-22 compatible AC or DC SSR (solid state relay) modules in any combination. An AC module always turns its output on at the zero cross voltage point, thus avoiding transient problems caused by heavy inductive loads. DC modules provide fast and bounce-free DC power switching. Compared to mechanical relays, SSRs are more reliable, respond quicker and are more resistant to noise. The PCLD-786 has eight digital output drivers for external relays. Driving voltages are jumper selectable for 5 V, 12 V or external DC power (if overloading a PC power supply is a concern). Each module or driver is equipped with an adjacent red LED for status monitoring.
    • PCLD-788

      PCLD-788 multiplexes 16 channels into a single I/O channel of an A/D converter, voltmeter or IEEE-488-based instrument. Up to 16 PCLD-788s can be cascaded for a total of 256fully-isolated differential channels. The PCLD-788 can be controlled by any PC-LabCard™ product via a 16-bit 20-pin digital output port, found on cards such as the PCL-711B,PCL-812PG or the PCL-818 series.Channel selection (0-15) and board selection (0-15) are done by programming the high-order four bits and low order four bits of a digital output byte from the main I/O card in use.
    • PCLD-789D

      PCLD-789D is a front-end signal conditioning and channel multiplexing daughterboard for use with PC-LabCardTM product's analog input ports. It multiplexes 16 differential input channels into a single A/D converter input channel. You can cascade up to teh PCLD-789Ds, allowing a single data acquisiton card to access 166 analog input channels.PCLD-789D has DB37 and 20-pin flat cable connectors and lets your PCL-818L or PCL-818HD access up to 128 channels without using an additional digital output cable to select channels. The PCLD-789D uses a high-grade instrumentatio amplifier that provides switch-selectable gains of 1, 2, 10, 50, 100, 200 and 1,000. This amplifier lets you accurately measure low--level signals with your PC-LabCardTM product. The board also contains a cold-junction sensing circuit that allows direct temperature measurement from thermocouple transducers. A wide variety of thermoncouples are supported with software compensation and linearization.
    • PCLD-8115

      The PCLD-8115 screw-terminal board offers convenient and reliable signal wiring for multifunction cards with 20-pin flat cable connectors or DB37 connectors, such as the PCL-818 series cards. PCLD-8710 is designed to match multifunction cards with 68-pin SCSI-II connectors, such as the PCI-1710/1710L/1710HG/1710HGL/1711/1711L/1716/1716Lcards.This screw-terminal board also includes cold junction sensing circuitry that allows direct measurements from thermocouple transducers. Together with software compensation andlinearization, every thermocouple type can be accommodated.Due to its special PCB layout, you can install passive components to construct your own signal-conditioning circuits. So you can easily construct a low-pass filter, attenuator orcurrent shunt converter by adding resistors and capacitors onto the board circuit pads.
    • PCLD-8710

      The PCLD-8710 is designed to match multifunction cards with 68-pin SCSI-II connectors, such as the PCI-1710U/UL, PCI-1710HGU, PCI-1711U/UL, PCI-1716/L cards. This screwterminal board also includes cold junction sensing circuitry that allows direct measurements from thermocouple transducers. Together with software compensation and linearization, every thermocouple type can be accommodated. The PCLD-8712 Screw-terminal Board provides convenient and reliable signal wiring for the PCI-1712/L of which has a 68-pin SCSI-II connector. Due to its special PCB layout you can install passive components to construct your own signal-conditioning circuits. The user can easily construct a low-pass filter, attenuator or current shunt converter by adding resistors and capacitors on board’s circuit pads.
    • PCLD-8712

      The PCLD-8710 is designed to match multifunction cards with 68-pin SCSI-II connectors, such as the PCI-1710U/UL, PCI-1710HGU, PCI-1711U/UL, PCI-1716/L cards. This screwterminal board also includes cold junction sensing circuitry that allows direct measurements from thermocouple transducers. Together with software compensation and linearization, every thermocouple type can be accommodated. The PCLD-8712 Screw-terminal Board provides convenient and reliable signal wiring for the PCI-1712/L of which has a 68-pin SCSI-II connector. Due to its special PCB layout you can install passive components to construct your own signal-conditioning circuits. The user can easily construct a low-pass filter, attenuator or current shunt converter by adding resistors and capacitors on board’s circuit pads.
    • PCLD-8751

      48-ch Opto-Isolated Digital Input Board
    • PCLD-8761

      24-ch Opto-Isolated Digital Input/ 24-ch Relay Board
    • PCLD-8762

      48-ch Relay Output Board
    • PCLD-880

      PCLD-780 and PCLD-880 universal screw-terminal boards provide convenient and reliable signal wiring for PC-LabCard™ products with 20-pin flat-cable connectors. PCLD-880is also equipped with a DB37 connector to support PC-LabCard™ products with DB37 connectors.PCLD-780 and PCLD-880 let you install passive components on the special PCB layout to construct your own signal-conditioning circuits.You can easily construct a low-pass filter, attenuator or current-to-voltage converter by adding resistors and capacitors onto the board's circuit pads.
    • PCLD-881B

      CIRCUIT BOARD, Wiring Terminal Board for PCI-1713 & PCL-813L
    • PCLD-885

      The PCLD-885 provides 16 SPST power relay channels with a maximum contact rating of 250 VAC @ 5 A or 30 VDC @ 5 A. The PCLD-885 can be driven directly by the digital output from PC-LabCards through its 20-pin box header or its 50-pin Opto-22 compatible connector.
  • I/O Wiring Cable (PCL Series)

    The PCL-1050 series consists of a set of convenient wiring accessories designed for use with I/O cards such as PCL-711, PCL-812PG, PCL-818H and PCL-720. With this set, field wiring becomes a much easier job. The set includes the following items:

    • PCL-1010B

      Braid-shielded coax cable with steel nickel plated male BNC plug connectors
    • PCL-10120

    • PCL-10121

    • PCL-10125

    • PCL-10137

      DB-37 connector with double-shielded cable,1m/2m/3m
    • PCL-10137H

      High-Speed DB-37 double-shielded cable
    • PCL-10150

      IDC-50 pin socket connector with flat cable
    • PCL-10162

      Double-shielded cable with DB-62 connectors
    • PCL-10168

      SCSI-II 68-pin male connector cable
    • PCL-10220M

      Cable for AMAX-2212 or AMAX-2242 to Mitsubishi J2S driver.
    • PCL-10250

      SCSI-II 100P to SCSI-II 50P x 2 Cable, 1m/2m
    • PCL-10251

      100-Pin to two 50-Pin SCSI Cable
    • PCL-10268

      SCSI-100P to SCSI-68P x 2 double-shielded Cable
    • PCL-10501

      The PCL-1050 series consists of a set of convenient wiring accessoires designed for use with I/O cards such as PCL-711, PCL-812PG and PCL-720+. With this set, field wiring becomes much easier. The set includes the following items: PCL-10501 adapter, analog I/O channels to DB37 connector PCL-10502 digital I/O port extender with ribbon cables PCL-10503 adapter, dual flat cables to DB37 connector.
    • PCL-10502

      The PCL-1050 series consists of a set of convenient wiring accessoires designed for use with I/O cards such as PCL-711, PCL-812PG and PCL-720+. With this set, field wiring becomes much easier. The set includes the following items: PCL-10501 adapter, analog I/O channels to DB37 connector PCL-10502 digital I/O port extender with ribbon cables PCL-10503 adapter, dual flat cables to DB37 connector.
    • PCL-10503

      The PCL-1050 series consists of a set of convenient wiring accessoires designed for use with I/O cards such as PCL-711, PCL-812PG and PCL-720+. With this set, field wiring becomes much easier. The set includes the following items: PCL-10501 adapter, analog I/O channels to DB37 connector PCL-10502 digital I/O port extender with ribbon cables PCL-10503 adapter, dual flat cables to DB37 connector.
    • PCL-10901

      DB-9P to PS/2-6P Cable

Related Materials